Ketanji Brown Jackson Sticker: Where to Display It

Quick Answer

Place your Ketanji Brown Jackson sticker on a clean, smooth surface like a laptop lid, water bottle, or notebook cover for the best visibility and durability.

Step-by-Step Display Guide

1. Clean the surface: Wipe the area with a mild soap and water solution or rubbing alcohol to remove dirt and oils. Dry completely before applying. Skipping this step can cause the sticker to bubble or peel early.
2. Choose a flat, smooth spot: Pick a location that is flat and smooth, like the center of a laptop lid or the side of a water bottle. Avoid textured areas or sharp curves. If the surface is curved, test with a small corner first to ensure the sticker lies flat.
3. Peel and apply carefully: Peel the backing slowly and place one edge first, then smooth outward with a credit card or your thumb to avoid air bubbles. If you get a bubble, lift the nearest edge and reapply; don't try to pop it with a pin.
4. Press firmly: Apply firm pressure across the entire sticker, especially the edges, to ensure full adhesion. Edges that aren't pressed down are more likely to catch and peel.
5. Let it set: Wait at least 24 hours before exposing the sticker to water or heavy handling to allow the adhesive to bond fully. For water bottles, hand wash only and avoid soaking to extend the sticker's life.

About the Sticker

• Ketanji Brown Jackson Sticker: This 3-inch matte finish sticker is waterproof and easy to peel. The matte finish resists glare, and the waterproof backing means it can handle water bottle use without damage.